Fixe Hely PLX/Duplex SS 3/8" x 31/2" Glue-In Bolt

The Fixe #014 EPXL HELY - Duplex Stainless - HCR Glue-in bolt anchor has been specifically designed for safe, efficient bolting of even the most demanding routes. The rod design prevents bubbles forming and ensures that the glue is distributed evenly, without the need to turn the tensioner. This glue-in bolt has also been designed to be installed into holes of 3/8" or 10mm in diameter, reducing drill bit wear and impact on the rock.

When placed properly in good stone, glue-in bolts are the strongest anchors available. Patience and experience are required when installing glue-in bolts. The mixing and installation of the glue is the key to a correctly placed glue-in. This type of bolt works excellent in soft or pocketed stone. Although not widely used in the US glue-in bolts are common in Europe.

• PLX - Duplex Stainless
• 6300lbs / 28kn
• 10 x 80mm
• SDS bit required: S803 or S079
  (click here to view SDS drill bits)

(Click on 'Technical Information' above to view a guide to placing 014epxl glue-in bolts.)