In stock

Fixe Plated Steel Powers Wedge Bolting Kit

Fixe Plated Steel Powers Wedge Bolting Kit #8995
$207.95

Fixe Plated Steel Powers Wedge Bolting Kit #8995

 
 
  #015-3/8" Plated Steel Hanger (10)
#R7412 3/8" x 2 3/4" Plated Steel Wedge Bolt (10)
#D5/Hurricane Hand Drill (1)
#S803 3/8 x 6 SDS Drillbit (2)
#8799 Adjustable Wrench (1)
#8998 Blowout Tube (1)
#8989 Deuce Bolting Bag (1)
#8771 Safety Glasses (1)
#7931 Bolting Brush (1)
Instruction Manual

The Fixe #015 Plated Steel Hanger is rated at 25kn. Model #015 will accomodate two carabiners, has three dimples to help prevent spinning and is cut from 3.5mm plated stock. This hanger is suitable for climbing gyms, industrial and rigging applications as well as rock climbing and mountaineering.
  • 5600lbs / 25kn breaking strength
  • CE/UIAA Certified Life Safety
  • 3.5mm Stock
  • Zinc Plated
  • 2 Carabiner Capacity
  • 3/8" / 10mm Bolt Hole

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor designed for consistent performance in cracked and uncracked concrete. The bolt is a construction grade fastener manufactured with a zinc plated carbon steel body and expansion clip that is commonly used as a climbing anchor. Nut & washer included..

Specs:
  • 3/8" Bolts TORQUE TO:
    20 Foot Pounds
D5/Hurricane Hand Drill- There is no better or faster set up for drilling by hand on lead. These drill holders can accept virtually any size drill bit (with appropriate collet) and they are 100% MADE IN USA! Key Features are: - Wrenches can tighten both 3/8" and 1/2" 5-piece bolts - The Holder is made from heat treated 17-4 stainless steel - Hardened striking insert, chamfered to prevent mushrooming - Swaged wrist loop with PVC tube - PVC Vinyl flanged grip to deflect missed hammer blows - Each drill comes with holder, collet nut, 2 wrenches (9/16 & 1/2" combo and 7/8 open & closed end combo), 25/64" DA200 collet (fits all SDS drill bits as well as 25/64" HSS drill bits) -Optional 9/32 collet allows use for 17/64" HSS drill bits (for 1/4" holes) -Weight: 17.2 oz (with collet). Requires no batteries!

SDS Plus drill bits are carbide tipped and can be resharpened.

Note: All SDS drill bits have a lifespan. As the carbide shoulders of the bit wear, the diameter of the hole decreases.

 

Write Your Own Review
You're reviewing:Fixe Plated Steel Powers Wedge Bolting Kit
To Top