In stock

Fixe PS Traditional Anchor Unit

Product Code: 007-1/2 Unit
$12.23

These units were manufactured with a slightly smaller diameter hole. Luckily the R7422 fits.


Sold as a complete unit. 1 - #007 and 2 - #R7422


The #R7422 requires a 1/2" drill bit #S804


The FIXE Traditional Anchor is designed for any type of route. When placed in good rock, the anchor simultaneously loads both bolt placements. The design locates the anchor bolts in a vertical orientation. This will eliminate the “Shock Load” possibility if one anchor bolt were to fail. This design is far superior to anchors that locate the anchor bolts across a horizontal plane.

  • 4950lbs / 22kn CE/UIAA Certified
  • 4mm Stock (hanger)
  • 10mm Stock (ring)

    Available with
  • 3/8" / 10mm Bolt Hole (standard)
  • 3/8" / 10mm Bolt Hole (tan option)
  • 1/2" / 13mm Bolt Hole

Write Your Own Review
You're reviewing:Fixe PS Traditional Anchor Unit
To Top