In stock

Fixe Stainless Power-Bolt Bolting Kit

Fixe Stainless Power-Bolt Bolting Kit #8991
Fixe Stainless Power-Bolt Bolting Kit Includes:
  #038-3/8 Stainless Hanger (10)
#R5910 3/8 x 2 1/4 Stainless Power Bolt (6)
#R5914 3/8 x 3 1/2 Stainless Power Bolt (4)
#D5/Hurrican Hand Drill (1)
#S803 3/8 x 6 SDS Drillbit (2)
#8799 Adjustable Wrench (1)
#8998 Blowout Tube (1)
#8989 Deuce Bolting Bag (1)
#8771 Safety Glasses (1)
#7931 Bolting Brush (1)
Instruction Manual

Specifications for Included Items:

The Fixe #038 Stainless Steel hanger will accomodate two carabiners, has three dimples to help prevent spinning and is cut from 4mm 304 stainless. This hanger has become the industry standard and is used in rope access and military personnel, the rigging and entertainment industry and can be found at cliffs across the North America.
  • 25kn CE Certified
  • 4mm Stock
  • 304 Stainless Steel
  • 2 Carabiner Capacity
  • 3/8" / 10mm Bolt Hole

The Power-Bolt 5-Piece sleeve bolt is a construction grade fastener that is commonly used as a climbing anchor. Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole. The 5-Piece bolt works well in soft rock where maximum expansion is required.

Stainless Steel Specs:
  • 3/8" Bolts TORQUE TO:
    12 Foot Pounds
#R5910 3/8 x 2 1/4" (A304 Stainless)
#R5914 3/8" x 3 1/2" (A304 Stainless)

Download the Powers Fasteners
Product Information Guide Here


D5/Hurrican Hand Drill- There is no better or faster set up for drilling by hand on lead. These drill holders can accept virtually any size drill bit (with appropriate collet) and they are 100% MADE IN USA! Key Features are: - Wrenches can tighten both 3/8" and 1/2" 5-piece bolts - The Holder is made from heat treated 17-4 stainless steel - Hardened striking insert, chamfered to prevent mushrooming - Swaged wrist loop with PVC tube - PVC Vinyl flanged grip to deflect missed hammer blows - Each drill comes with holder, collet nut, 2 wrenches (9/16 & 1/2" combo and 7/8 open & closed end combo), 25/64" DA200 collet (fits all SDS drill bits as well as 25/64" HSS drill bits) -Optional 9/32 collet allows use for 17/64" HSS drill bits (for 1/4" holes) -Weight: 17.2 oz (with collet) Requires no batteries!

Our SDS Plus drill bits are carbide tipped and can be resharpened.

Note: All SDS drill bits have a lifespan. As the carbide shoulders of the bit wear, the diameter of the hole decreases.


Write Your Own Review
You're reviewing:Fixe Stainless Power-Bolt Bolting Kit
To Top