Fixe 316 Stainless 10mm x 90mm Glue-In Bolt
When placed properly in good stone glue-in bolts are the strongest anchors available. Patience and experience are required when installing glue-in bolts. The mixing and installation of the glue is the key to a correctly placed glue-in. This type of bolt works excellent in soft or pocketed stone. Although not widely used in the US glue-in bolts are common in Europe.
The 10mm bolts require a 12mm or 1/2" diameter hole.
If you have questions regarding glue-in bolts or their placement please feel free to contact us.
- 316 Stainless
- 40kn
- 10 x 80mm (3/8" x 3 1/2")
- SDS bit required: S804 or S078
(click here to view SDS drill bits)
(Click here to download 'Technical Information'.)
Fixe has been working on improving its anchor range with a highly corrosion resistant material (HCR) in order to increase safety in environments of all kinds, including marine and corrosive atmospheres, during a longer period of time. Our PLX material has been specifically developed to help withstand Stress Corrosion Cracking (SCC) and minimize Galvanic Corrosion (GC). The material also has improved characteristics compared to common corrosion, mechanical resistance and superficial wear and is far superior to conventional stainless steel products.
|
Technique & Security Specifications |