FIXE Plated Steel 1/2 Traditional Anchor

The FIXE Traditional Anchor is designed for any type of route. When placed in good rock, the anchor simultaneously loads both bolt placements. The design locates the anchor bolts in a vertical orientation. This will eliminate the “Shock Load” possibility if one anchor bolt were to fail. This design is far superior to anchors that locate the anchor bolts across a horizontal plane.

4950lbs / 22kn CE/UIAA Certified 3.5mm Stock (hanger) 10mm Stock (ring)
Available with 3/8" / 10mm Bolt Hole (standard) 3/8" / 10mm Bolt Hole (tan option) 1/2" / 13mm Bolt Hole