In stock

Fixe Plated Steel 1/2 Ring Anchor

Product code: RAPS-1/2

The FIXE Ring Anchor is one of our most popular Anchor units. A pair of Ring Anchors make an excellent anchoring system for any type of route or rappel station. Ring Anchors should be placed on the same horizontal plane, at least 8” apart in good rock. A single Ring Anchor may be used in conjunction with other FIXE anchors. This unit should be placed in pairs or with another Top Anchor unit.

  • 25kn (5620lbs) MBS CE/UIAA
  • Certified to EN795:2012 and EN959:2018
  • 3.5mm Stock (hanger)
  • 10mm Stock (ring)
  • One of our most popular anchors!

    Available in:
  • 3/8" for 10mm / 3/8" anchors (bolts)
  • 1/2" for 12mm / 1/2"anchors (bolts)


*Fixe does not recommend plated steel for outdoor use

*If you choose to use plated steel outdoors, use only in arid and low corrosive environments.



Write Your Own Review
You're reviewing:Fixe Plated Steel 1/2 Ring Anchor
To Top